What Is Mesh Wi-Fi Technology? Repeater vs Mesh Wi-Fi? How To Install Extender Router?

What Is Mesh Wi-Fi Technology? Repeater vs Mesh Wi-Fi? How To Install Extender Router?

What Is Mesh Wi-Fi?

What is Mesh Wi-Fi? This is the topic and now a lot of use wireless internet in our homes and the reason we use wireless internet is that we want the freedom of accessing the internet from anywhere in our home whether it’s in the kitchen, bedroom or living room. Wi-Fi gives us the ability and freedom to do just that from all of our devices. However, sometimes, the Wi-Fi signals can be a little spotty, for example, there might be areas in your home where the the-Fi signal is weak or it may be dead.What Is Mesh Wi-Fi Technology? Repeater vs Mesh Wi-Fi? How To Install Extender Router?

Therefore, you are going to have slow internet speeds or you may not even have internet access at all. And, this creates a lot of frustration. now, this could be cause for several reasons, for example, it could be the construction building that’s interfering with the signals or it could be the placement of the Wi-Fi router in the home.

For example, if the Wi-Fi router is down here in the living room, you might have a weak signal or no signals up here in the bedroom. Because of the further, you get from the Wi-Fi router. The weaker this signals will be, so to remedy this problem, a lot of times people would buy a Wi-Fi extender to extend the Wi-Fi signal. Now, even though Wi-Fi extenders do work, the problem is that Wi-Fi extenders create their Wi-Fi network with their separate SSID. So, you would have to connect to the Wi-Fi router or the Wi-Fi extenders network depending on where you are in the home.

So, if you are closer to the router, than you would connect to the router or if you are closer to the extender, then you would connect to the extender so this can be a little extra work. Or, another solution could be is to place the Wi-Fi router to a different location in the home. But, this can also be an issue if the modem has to be in a certain place in your home. Because of cabling, issue, but even if you were to place the Wi-Fi router to a better spot, the signals still may not be strong enough to cover the entire home. But, there is a better solution for this. And, this is by using a Mesh Wi-Fi system. Mesh Wi-Fi is the latest technology to solve the issue of weak or dead spot issues with Wi-Fi.

A mesh Wi-Fi system is a group of routers or Wi-Fi points that are placed in different locations inside a home and it provides a blanket of Wi-Fi coverage. Throughout the home. So, it does a pretty good job of eliminating weak Wi-Fi signals or dead spots. In the home, a great feature of a Mesh Wi-Fi systems is that the Wi-Fi points communicate with each other wirelessly to create one large Wi-Fi network. So, there are no cables involved. When the Wi-Fi points are communicating with each other, which makes the placement of the Wi-Fi points that much easier.

So, for example, if you wanted to set up a mesh Wi-Fi system in your home. Normally you would have a modem that brings the internet into your home and then you would attach one of the mesh Wi-Fi points to the modem using an Ethernet cable and then you would place the other Wi-Fi points in different locations throughout your home.

Then once this is done the Wi-Fi points will all talk to each other to create a seamless internet connection that covers your entire home for all your wireless devices to connect to. Now, this system creates one large Wi-Fi network, so it’s not like each Wi-Fi point is creating its Wi-Fi network with its SSID like an extender would. It’s all one network with a single SSID.

So, if you have a wireless laptop that’s connected to your mesh Wi-Fi. You can move from room to room seamlessly because as you move to different areas in your home. Your laptop will always connect to the nearest Wi-Fi point. It will seamlessly disconnect from a Wi-Fi point and then reconnect to another one. So, it eliminates any hassle of your manually connecting to different Wi-Fi points. So if you are interested in getting a mesh Wi-Fi system.

How Does Mesh Wi-Fi Network Works?

You may have a fancy looking wireless router that promises lightning-fast speeds and ridiculous range only to find that you cannot even load a gift in your upstairs bedroom. Maybe you are experienced, this right now and the video may not be clear at the moment. And, with our increasing reliance on mobile devices, these days like tablets and smartphones and laptops solutions for extending the range of your Wi-Fi have become quite popular than ever. Including mesh networks, and obviously, here we are talking about the Wifi setup that uses multiple nodes that can spread Wifi signal all of your home office or pillow fort.

As it were on the surface, the way it operates seems pretty simple. Just connect one of the hockey puck looking nodes to your modem and place the others around your house. Or you need a signal to boost. Each node connects to the others in an attempt to give you stronger wireless signals over a much larger area than you would get with a single router. But what if you have a cheap range extender for your wireless networks? It sounds like it does the same thing, what’s the difference? So, here’s the deal. Variety of Wi-Fi extenders or repeaters are notorious for degrading the network speed because their antennas have to communicate with both client devices like your phone and laptop as well as your main router.

Your effective speed can be reduced as much as 50% while using one, which is bunk by contrast nodes in a mesh network are typically engineered with separate antennas. So, they can talk not just the main router, but to each other. This helps them handle network backhaul. Backhaul is all the traffic other than what’s being transmitted to and from the iPhone. In your hand although, this is not a perfect system and mesh networks can still slow down if you add lots of nodes. They do tend to be much quicker than simple range extenders. These days you can get fancy network extenders with multiple antennas and even models that support mu-mimo. Which lets the extender send and receive from multiple devices simultaneously which you can learn about right in another article on this website.

So, are there still benefits to going with the mesh network? Instead of it turns us. There are you see what an extender does is create a whole new Wi-Fi network instead of being a true extension of the one created by your router. This puts you into one of two less than ideal situations. One, if you’re extended use a different network name or SSID, you have to manually switch to it. When you want to use it or two, if your extender shares the SSID with your main network, most devices are not smart enough to automatically switch to whichever one is giving off the stronger signals.

Leading to frustration when you walk between your router and the extender. Mesh Wi-Fi, on the other hand, uses one single glorious network that is intelligently managed by whichever node. Serves as your primary router, making it a seamless experience, as you move around your house. Additionally, mesh networks can adjust automatically, if you add or remove nodes and quickly reroute the network. Traffic between them to account for the new node configuration. And, mesh networks also come with creature comforts that are harder to find traditional wireless routers.

Everything from easy network management with a mobile app to integrated support for smart home devices making them attractive to folk who want a set it and forget it experience. However they do tend to be pricier than extenders, so make sure that a mesh network is not overkilled for your home. You probably don’t need one of you are living in Tokyo and the only thing you can afford is a studio, the apartment.

Technology Behind Mesh-Wifi?

The next most important thing we will talk about is – why everybody’s talking about it all the time? It might be a modem router combo in one and it projects a Wi-Fi signal within a certain radius around itself that allows your devices to then connect or through the modem or internet. Now, in a Wi-Fi mesh, network, however, there is one main router that plugs into your internet modem. In the same way, a traditional one does but then there are also other hubs.

That is identical to the main router hub that you can place throughout the house. Generally, on the edge of the original ones, range to then increase the range of the network. Now, essentially does this by having a superfast connection between each of the satellite hubs that the main hub plugged into the modem and then each hub produces its Wi-Fi network that your devices can connect to communicate with each other or through the modem tube.

Again access the Internet. So, let’s say for example you had 30 hubs, all positioned in a cluster and yes a lot of these mesh systems supported that many hubs, the smart things. One – I am using supports upto 32. This signal would not just get passed through the hub. You are closed to the next one, the next until eventually through to the main hub connected to the internet. It will find the fastest way through other hubs.

To do so, even if that way, is not the same. Every time they use a different route, for example, let’s say there is traffic on one of the hubs and it’s being over-utilized. It can skip that hub and use another one. That’s nearby now, that was a popular benefit of these Mesh Wifi Networks.

Of course, is better range also, the satellite systems don’t need anything besides being plugged into a power outlet. Either, so there is a lot of options, one where you can put them you put these all over your house and covered all in super satisfying strong Wi-Fi signal. And, even in a smaller space like my apartment. For example, you can use it to further your 5 Gigahertz coverage which has a much faster throughput. But is a much shorter range than your 2.4 gigahertz. Another benefit is they are the easiest setup ever.

This Samsung one, in particular, was stupid, easy – simply plugged in the hub to the modems Ethernet and plugged it into the wall then. I opened the smart things app and selected a device and within a minute or so it was up and running. Then, each subsequent hub I added, I just plugged into an outlet, open the smart things app again and this time it automatically found the hub.

Also Read: Best Comment Plugins For WordPress

Leave a Comment

Your email address will not be published. Required fields are marked *